Cargo lift, as you can see in here, the lift can move materials--in factories, warehouses, industrial plants,--anywhere that products or supplies need to move from one level to another. It is an ideal replacement of elevator that provides fast, efficient, convenient working from mezzanines, balconies, basements, and between levels in multiple story buildings. In a word, We provide the most complete line of cargo lift from mechanical to hydraulic to fully automatic, customized systems for various requirement.
|Platform size 2000*2000mm||Platform size 3000*2500mm||Platform size 1200*1200mm|
|Load capacity||Lifting height||Load capacity||Lifting height||Load capacity||Lifting height|
|Delivery time||About 15-45 days according to the product model|
1.Double insurance : Double chain and safety wire rope transmission.In case the chain breaks, the wire rope can play asafety role.2.Overload protection : Hydraulic unit with overload protection device. If overload, the hydraulic station automaticallyrelief pressure and stop running.3.Emergency Stop : The lift can be stopped immediately in case of any emergency.4.Emergency Lowering : The platform can be lowered down manually in case of power failure.5.Interactive landing door : A switch that cuts off power to the machine when the door opens. The equipment cannot startuntil the landing door of any floor is closed.
Convenient And Safety Design
1.Operating principle: Cylinder jacking, chain drive.Compared with the traditional hoisting machine which only relies onthe steel wire rope, the safety factor and stability are greatly improved.2.Automatic landing: Target control button.The platform automatically stops when it reaches the target floor.3.Multipoint interactive control : Any floor has control buttons to realize the elevator calling landing function.
2. Product should be fully tested and examined before shipment.
3. All-life long technical support, online and telephone service.
3. Overloading is strictly prohibited during use and the contents should be properly placed.
4. The lubricating oil used should be kept clean and must not be mixed with water and other impurities. It should be replaced
every six months.
5. When the maintenance or failure occurs, the power supply should be cut off in time.